Freeing oneself and escaping

  Handcuffs

-Lockpicking

-Brute force (possible with some)

------------------------------------------

Rope

Undoing knots with the hands.

Undoing knots with the teeth.

Seeing if possible: Going through the rope with the teeth (cut (front teeth), stab and cut (canine teeth), moling (molar teeth).

Seeing if usefull (experimental, for research): Water or other fluid

Finding something sharp

Creating something sharp

-

Tai rips

-Brute force, brute power

-With a shoe lace and sawing through

-With the teeth


Finding something sharp

Creating something sharp

-------------------------------------------

Might be needed to stand up.

-Training that

--Hands on the front and hands on the back

--------------------------------------------

Analyse

Find weakness, and exploit 

-

More 1:

Bashing

Wricking


Leverage


More:

Bigger or wider when done on.

-Then body or body part to normal again


Bashing against something

Something through and rotating that


Maybe:

The thumb nail

-For rope and or tai rips

------------------------------------------------

Destroying training

-Brute strength

-Technique

-Extra: Both

Gain knowledge

------------------------------------------------

By Jeffried Koelewijn

Comments

Post a Comment

Popular posts from this blog

Important problems to know for sneaking

Important problems to know for sneaking: Joint or tendon noises, which are hearable sometimes. -Knacking for example - Noises from the floor, a wooden floor for example inside, or from breaking twigs outside. Noises from hitting things, like desks inside, or bushes and branches, outside. -
Read more

Going through, bypassing and breaking locks, and passwords and more

 Lockpicking Going along all combinations -Counting from 1 to 999 or 9999. 0001 to 9999. -Turning a wheel before that wheel after it turned 10 times for example. Last, furthest wheel turns the most. Iron thread lowered into certain combination locks, and tapping it until goes down when turning the wheel(s). Then synchronised turns, if needed at all. Certain combination locks. Pulling and most or least resistance. Certain clicking sounds. Stethoscope. For certain combination locks. -Round one -Or probe Extra: An acoustic frequency spectrum analyser. Certain peaks (different). When turning the wheel(s). Padlock sham Flat screwdriver in and turning it -Certain cases Making a second key. -Fast mold also possible. - A very small camera and light. Which has a reinforced cable so it can be put into things. To watch inside. To watch the mechanism. - Drilling the key hole - Torch cutter Metal saw Metal drills -Tungsten carbide drills Hammer -Just destroying it Club hammer Sledgehammer Hamme...
Read more

Destroying things and breaking inside and or escaping

 Destroying things and breaking inside and or escaping ------------------------------------------------------------------ Pulling Bashing Rotating Widging - Strength pull Explosive pull Bashing pull -One pull -Multiple  Bashing pulls Bashing pulls, and in multiple directions Rotating -Causing torsion For rotating: Finding the right angles fast, for breaking ----------------------------------------------------------------------- Learning a lot of metal bending methods and techniques. -Bending metal over the upperleg -With two hands, overhands and against the abdominals -With two hands, underhand grip and under the chin -Mixed grip, in front of the body -And a lot more ----------------------------------------------------------------------- Kick door in -Forwards kick -Backwards kick Important: Also right place - One thick bar -For rotating something until it breaks -For putting in between things Two thick bars -For rotating something until it breaks -For putting in between thing...
Read more